CDKWS - FERRIC CHLORIDE, F2877
- MSDS: CDKWS
- Manufacturer: SIGMA CHEMICAL CO
- Product Name: FERRIC CHLORIDE, F2877
- National Stock Number: 6810-00N021686
Product Identification
Product ID:FERRIC CHLORIDE, F2877
MSDS Date:12/17/1993
FSC:6810
NIIN:00N021686
MSDS Number: CDKWS
Responsible Party
US
Emergency Phone: 314-771-5765
Info Phone: 800-325-3010
Cage: 21076
Contractor
Telephone: 314-771-5765
Cage: 21076
Ingredients
IRON (3+) CHLORIDE, HEXAHYDRATE; (FERRIC CHLORIDE
CAS: 10025-77-1
RTECS: NO5425000
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF SWALLOWED, INHALED,
OR ABSORBED THROUGH SKIN. MATERIAL IS EXTREMELY DESTRUCTIVE TO
TISSUE OF THE MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT, EYES
AND SKIN. INHALATION MAY BE FATAL AS A RESULT OF SPASM,
INFLAMMATION AND EDEMA OF THE LARYNX AND BRONCHI, CHEMICAL
PNEUMONITIS AND PULMONARY EDEMA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:MAY INCLUDE BURNING SENSATION, COUGHING,
WHEEZING, LARYNGITIS, SHORTNESS OF BREATH, HEADACHE, NAUSEA AND
VOMITING. TO THE BEST OF OUR KNOWLEDGE, THE CHEMICAL, PHYSICAL, AND
TOXICOLOGICAL PROPERTIES HA VE NOT BEEN THOROUGHLY INVESTIGATED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES & SKIN:IMMEDIATELY FLUSH EYES/SKIN W/COPIOUS AMTS OF
WATER FOR AT LEAST 15 MIN WHILE REMOVING CONTAMINATED CLOTHING &
SHOES. ASSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE
EYELIDS W/FINGE RS. INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING
GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE
OXYGEN. INGEST:WASH OUT MOUTH W/H*2O PROVIDED PERSON IS CONSCIOUS.
CALL A MD.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE TO SURROUNDING
FIRE CONDITIONS.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS,
RUBBER BOOTS AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND
HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND
WASH SPILL SITE AFTER MATERI AL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP TIGHTLY CLOSED. STORE IN A COOL
DRY PLACE. DO NOT BREATHE DUST. DO NOT GET IN EYES, ON SKIN, ON
CLOTHING.
Other Precautions:ADDITIONAL INFORMATION: ALLYL CHLORIDE MAY POLYMERIZE
VIOLENTLY UNDER CONDITIONS INVOLVING AN ACID CATALYST SUCH AS
FERRIC CHLORIDE.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WASTE DISP METH: IN A HAZARDOUS WASTE SITE. DESTROY ANY EXCESS SULFIDE
WITH SODIUM HYPOCHLORITE. NEUTRALIZE THE SOLUTION BEFORE FLUSHING
DOWN THE DRAIN. OBSERVE ALL FEDERAL, STATE AND LOCAL ENVIRONMEN TAL
REGULATIONS. EYE PROT: AND FULL LENGTH FACESHIELD .
Chemical Properties
Boiling Pt:B.P. Text:>536F,>280C
Melt/Freeze Pt:M.P/F.P Text:98.6F,37.0C
Spec Gravity:1.653
Appearance and Odor:YELLOW POWDER AND CHUNKS
Stability
Stability Indicator/Materials to Avoid:NO
STRONG OXIDIZING AGENTS, FORMS EXPLOSIVE MIXTURES WITH: SODIUM,
POTASSIUM.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HYDROGEN CHLORIDE GAS.
Disposal
Waste Disposal Methods:THE MATL SHOULD BE DISSOLVED IN 1) WATER; 2)
ACID SOLUTION OR 3) OXIDIZED TO A WATER-SOLUBLE STATE. PRECIPITATE
THE MATL AS THE SULFIDE, ADJUSTING THE PH OF THE SOLN TO 7 TO
COMPLETE PRECIPITATION. FI LTER THE INSOLUBLES & DISPOSE OF THEM
(SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.